I decided for my grandmothers to make kitchen boards for the new year.
Tool:
1. Plywood (10 mm)
2. Pencil.
3. Electric jigsaw
4. Transfer paper
5. Wood burner
6. Varnish for wood
7. Tassel
8. Sandpaper
9. Drill
10. Drill (12 mm).
First step:
I drew a board by hand in the form of a pear. First I cut out one board, and then two others on the first board. Drilled a hole. Behind their skins, to the state of a smooth surface.
Second step:
Then I went on the Internet and found the drawings I liked, and with the help of the special program “I used the Pla Card program” I did so that they fit on the board well. And printed it.
Third step:
Then he transferred the drawings with the help of transfer paper to the boards.
And burned with a wood burner.
Fourth step:
And after that he varnished the wood from the side of the drawings.
It turned out a good gift for the new year.