I decided to make this shelf for small items and all sorts of small souvenirs.
Materials:
1. Board. (length, width and thickness of your choice)
2. Board. (1/3 of the length of 1 board, and the width and thickness of 1 board)
3. 2 bars. (as long as you want, but 15 mm wide and thick).
4. Thin tin.
5. Two short screws.
Instruments:
1. Screwdriver.
2.Nozhovka.
3. Chisel.
4. Scissors.
5. Ruler and pencil.
1.Step. We measure on the boards the places where you need to make cuts. On the bars from the edge we measure 5 cm, and everything else as you want, for example, I did so, 5 cm back from the center of the board in both directions.
2.Step. We saw on the markings.
3. Step. We cut off the chisel in those places where they sawed. And so we do on all boards and bars. As shown in the photo.
4.Step. We fasten the boards together by connecting them in the saw cut places. If you did not get a very strong bond, then you can glue it with glue or screw it on.
This is what you should be able to do.
5.Step. Now we need to make ears to fix the shelf to the wall. We take tin and roughly draw the shape of the ears, and then cut them with scissors.
6.Step. We attach ears to the shelf with the help of screws.
That's all the shelf is ready, you can immediately attach it somewhere.