Good day, today the author of this video will show how to make an airplane that flies from the magical power of the hands.
Step 1: The author needs to take a thin piece of polystyrene. It can usually be found in gadget boxes.
Step 2: The author takes the layout model of the airplane.
It prints a diagram, but if you do not have a printer, attach a piece of paper to the computer monitor and circle.
Step 3: Then the wizard cuts the circuit.
Step 4: The master applies the airplane circuit to the foam and sticks it with tape.
Step 5: Then the author cuts the polystyrene according to the outlines.
After that, he cuts the ends of the wings on paper, the foam does not cut!
Step 6: After these steps, the author put the product on the edge of the table, pressing it with a ruler, slightly bending up the cut of the wings.
Step 7: The wizard uses a regular sticker. Cuts a thin strip of stickers that sticks to the front of the airplane.
If the airplane falls too sharply, then the nose must be shortened, and if it flies jerkily, it must be lengthened.
It should fly smoothly down.
Step 8: For beauty, you can colorize the airplane, as well as experiment with its forms - The author claims.
If you did not find such a thin foam, then you can cut it with a cutter, the author says.
Step 9: The wizard does a test to check the magic plane. To do this, he needs cardboard.
He works on this trailer as in the photo.
Video homemade: