Cardboard cat house

For pets

Good day, today the author of this video will show how to make a house for a cat out of cardboard do it yourself.

Step 1: To make a house, the author requires: a cardboard box. Be sure to check if your cat is placed there.

Step 2: Now the author cuts out four patches in order to increase the height of the walls of the house with the help of closing leaves. He patches PVA glue on patches and glues it inside.

Step 3: After these manipulations, the author marks and bends the two long walls of the box as shown in the photo below.

Step 4: Then the master measures the length of the house and cuts out a square piece of cardboard on which you need to determine the middle, draw a line, make a bend in this place.

The result is a great roof for the house.

Step 5: The author applies glue to the previously curved sides of the house and glues the roof.

Step 6: The author applies a ruler to the protruding edges of the box and carefully cuts them off.

Step 7: Next, the author measures and cuts a long rectangle. Then he makes four bends, glues two ends together.

The author turns out a chimney.

After that, the author applies it vertically to the roof, makes a mark and cuts it out.

After all this, the author measures and cuts openings for the chimney.

Now the master greases the joints with a thick layer of glue (must be allowed to dry).

Step 8: The master takes a large object and outlines the contour of the doorway, cuts it out.

Also, the author comes with a window for the house.

Step 9: The master takes a piece of thick paper and a round object for less with which the author makes a tile template for the house. He cuts out a template, applies it to another paper and draws a contour. He cuts out all the pieces.