Smoking is certainly harmful, but as they say: if you can’t, but really want to, then you can.
Let's see how you can make a hookah out of things lying around in the workshop.
Tools needed.
1. Welding inverter.
2. Engraver, he is a drill.
3. Angle grinder.
4. Drill.
5. Sharpening machine.
Materials required.
1. The filter for water.
2. Tea cup with teapot.
3. Bicycle sprocket.
4. Hose from the shower.
5. Stand from the shower.
6. The chess king.
7. Brass plumbing with a diameter of half an inch.
8. A brass adapter with a diameter of half an inch.
9. A decorative element from an old chandelier.
10. Pasta GOI.
11. Tape FUM.
12. Ball from the bearing.
13. A piece of steel pipe with a diameter of four inches.
14. Rubber o-rings.
15. Four electrodes.
16. Sandpaper.
17. Black paint.
18. Paint imitating bronze.
19. Brass thrust ring from metal-plastic fitting.
When we put things in order in our workshop, we found out that we have everything for making a hookah.
From a cracked tea cup we get a teapot.
It will make a bowl for tobacco.
We cut the excess from the teapot using a drill with a diamond cutting wheel. Then we clean the edge with sandpaper.
Old Soviet shower stands were made of brass pipe. We cut off about forty centimeters from the rack, rip off the old, dead anodization and polish it with felt and GOI paste. This will be the mine of our hookah.
Now you need to somehow attach the bowl to the mine.
To do this, the old unnecessary chandelier was dismantled, one of the decorative elements was very well suited for this purpose.
We will make a hookah flask from a water filter, it has an airtight lid and there are brass threads on the sides that will be very useful for us.
But first, you need to make a stand for a hookah, since the flask by itself on the table is very uncertain. For the manufacture of the stand, a leading sprocket from a bicycle was used, a scrap of a hundredth steel pipe and three electrodes from which the coating was previously beaten. We weld all the parts together and have an original and stable stand.
We paint the rusting parts in black color and after drying we pass a little paint imitating bronze.
The mouthpiece is made of a chess king. We drill in the center a hole we grind to the size of a fixing nut on the hose from the shower and cut the thread. It is better to grind a figure using a drill and a grinding machine.
In the center of the water filter cover, we drill a hole for the hookah shaft.
All parts are thoroughly cleaned, polished and washed thoroughly.
Now collect our hookah. We seal the shaft with a rubber ring, and fix the brass thrust ring from the metal-plastic fitting on top.
Set the flask in the stand.
On one side of the bulb, through a brass adapter with a diameter of half an inch we fasten the hose from the shower.
On the other hand, screw the brass corner into the thread and install the ball from the bearing into it, this will be a purge valve.
We install the tobacco bowl in the mine, seal all joints with tape FUM, and rubber rings.
The hookah is ready. You can do it, but think about it before use, because the Ministry of Health warns for the last time: smoking is dangerous to health.
You can watch a video on making a hookah here.