» Fixtures »Ladle in the bath in 2 hours

Ladle in the bath in 2 hours


Well, in general, I decided to give the father-in-law something for a new bath, I looked and the cheapest and most suitable gift was a ladle in the bath, but damn, the issue price of 500 r does not seem to be a pity, but playful hands do not give rest to the head. I decided to make a ladle or a mug in the bath myself. I bought a stainless steel mug 85 r,
and found the rest in the garage Well, I also found 2 hours of time.

first worked as a shurik then a jigsaw

Well, at the end of the circle and emery, and the result


it seems to be pretty good
10
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
9 comments
Author
Well, everyone probably, firstly, the bucket is exactly what everyone liked, and it performs the functionality,
Secondly, at a temperature of 80-85% in the steam room it’s not a pain, but you can even grab a wooden ladle, at least from birch, even from spruce or larch,
Common fatigue
Author
It can be seen that you have no one and never will. What could he do? for 2 hours, I’ll probably go for beer or to write any crap in nete.
if I had such a son-in-law, I’d be ashamed of him with this bucket and playful ones!
On the third photo from the bottom, there are all signs of coniferous wood: the structure of the tree, including “rags” at the places of rough processing of the cuts, and also to the left of the lower hole from the nail a trace very reminiscent of tar.
Judging by the figure, 99% pine)))
The author replied in PM ... It seems like a birch hilt ....
Mounting with a clamp - somehow "not ice." The mug has a handle, to put it into a piece of wood and fix it there is not a problem. And the handle made of coniferous wood, as already noted, and even with traces of nails, replaced with deciduous.
And what wood billet? ... Ordinary coniferous? ... So it sticks to your hands if you heat up to a hundred ....

We advise you to read:

Hand it for the smartphone ...