This lies in bulk, it is very difficult to get a specific part, if not impossible. It is not possible to see what exactly lies there.
There was an idea to come up with a "repository" for all this porridge, but since this is not a warehouse or a workshop, standard solutions are not suitable here. At least I didn’t find it (your suggestions will be appropriate) I don’t feel like attaching to the walls since this is a temporary “warehouse”. Buying factory racks is expensive and then where to put them in - throw them out?
There are many bars from old wooden frames that I needed as a source of glass.
They are about this length 60-70cm, 130-140cm, 2000-2100cm. From them I want to make a shelf.
Saw them to the desired size and make or buy
I don’t feel like fasteners, and why? I think to attach to a PET tape
and black screws.
Having estimated what sticks, boards and sheets I have
I decided to assemble such a design
option 1
Here the difficulty arose, how to fix the bars on which what I want to store will rest. You can certainly come up with these headscarves.
And then I decided to do it differently and so the second option was born
With a support for blanks, it’s simpler and more complicated here, on the one hand, you don’t need to be smart: put ready-made bars with good leverage around the edges, but there’s almost nothing to fix in the center, then it’s not clear how this fastener will interfere with the sheet material walls?