I offer 100% safety against dangerous falling and slipping in the winter
period, especially during the HUNGER.
And so we will be engaged in the manufacture of horseshoe mites.
REQUIRED: metal 1.5mm, yew, chisel.
We cut out metal from metal with scissors (it is possible in a yew with a chisel (Fig. 1) two blanks, 15x20mm (depending on the type and size of shoes), straighten \ align, core \ mark future holes for screws. We drill holes with a diameter of 3-4 mm. Next, we clamp the workpiece with the holes diagonally in the yews (Fig. 2) and begin to make cuts with a chisel. When cutting, the slice begins to twist and you need to make sure that the bend of the slice is not very sharp, that is, it does not twist into a “ram’s horn”, and was quite moderate, not very high. When the first "DAC" is ready, the workpiece in yew overlap we put it on the opposite diagonal and make a similar thread. Both grooves should be symmetrical - they are equalized by striking the chisel. The height of the “dacs” can also be adjusted by gently tapping them with a hammer. New horseshoes are very sharp, this will negatively affect walking on linoleum and fleecy coatings To avoid this, the “trunks” can be blunted on an emery. You also need to be careful when walking on a tile, paradoxically, but you can slip!
And that’s it, you got a very strong and reliable protection against slipping.
The next not unimportant stage is the location and fastening of them on shoes. Figure 3 schematically shows the position of the horseshoe. She must
fasten with a slight offset from the center to the toe of the shoe, so that when walking, a comfortable fullness of the pressure of the foot on the bracket is felt. As a last resort, brackets can be twisted for convenience. The heel is preferably one-piece, but they have passed the test on other heels.
"Holes" do not bend, due to the shock-absorbing properties of the heel, there are enough horseshoes for a very long period, of course, if you walk
neatly not "shuffling" feet on the asphalt. Basically this device very practical for working, coarser shoes, but if the horseshoes are made miniature, they are perfect for the middle class.
That's all. Take care of yourself and your loved ones!
