Step 1: First, he takes an ordinary lamp, and before starting work, he observes safety precautions, puts on glasses and gloves.
Step 2: The wizard uses pointed pliers and pulls out the solder after that gets rid of the black insulation.
Step 3: The author takes a direct screwdriver which will break off the glass part inside the light bulb, pull out the contents.
Step 4: He has a completely empty lamp in his hands with a neat, even hole. On the street, the master found a beautiful stone on which he makes several hot-melt glue points, for good stability.
The master applied hot melt so that a light bulb could be glued.
Step 5: He went to the forest for a filler for the terrarium.
The role of a filler can be: moss, forest soil, tree bark ...
Step 6: A small cone is made of paper with the help of which it pours small pebbles, they act as drainage, then there is a layer of sand (be sure to level it.)
Now it is falling asleep on forest soil.
Step 7: Use tweezers to fill the terrarium.
Step 8: Apply a syringe with a needle. Pours a couple of drops of water into the terrarium.
The author took some acorns from the forest. He takes PVA glue and smears the acorn to serve as a cork. If you did not find acorns, then you can take a stick and cut a cork out of it.
Step 9: The master closes the cage.
All terrarium is ready.
Video: