Who doesn't like a bowl of rich cream ice cream? But instead of buying ice cream at the store, you can do it at home, so you can control all the ingredients and be creative. You can choose a base that uses eggs with or without eggs in the style of Philadelphia, but the most important decision is milk, cream. Ice cream made in this machine can be very light, but you can also grind manually with a spoon (but made in the car is tastier). Today, I will show you how to make an ice cream machine at home. This is a very useful thing with which you will get a tasty treat for 10 - 20 min.
STEP 1. Materials \ Tools
1. Plastic container (d-18, h-22)
2. Aluminum container (d-12, h-16)
3. Bolt (d-1, h-25)
4. Screwdriver
STEP 2. Aluminum Tube
Take an aluminum pipe 10 cm long, parts for mixing ice cream will be attached to it.
STEP 3. Making wings for mixing
To make the shaft wings, take two aluminum sheets 13 x 6.5 cm thick. Cut as shown in Figure 2.
STEP 4. Putting together the wings and the aluminum tube
Take hard glue and put all the pieces together. Apply glue to the wings and stick as shown.
STEP 5. Drill a hole
Drill a hole with a diameter of 1cm
STEP 6. Connect the cover and bolt
Then put together the bolt, washer and cover as in the pictures
STEP 7. Install the bearing on the bottom of the aluminum container.
Install the bearing in the middle of the bottom of the aluminum container (I used paste for welding).
STEP 8. Close the bearing hole
Close the bearing bore.
STEP 9. Glue the plastic container to the aluminum
Apply glue to the plastic button and stick to the bottom of the plastic container
STEP 10. Join all materials
STEP 11. Cooking ice cream
Putting it all together, throwing ingredients, falling asleep ice and spinning for 20 minutes
STEP 12. Check
Ice cream turned out to be very tasty, tender and light. If desired, ice cream can be sprinkled with berries, fruits or nuts. Bon Appetit.