We will need:
1. Cardboard box (bottom size should correspond to A4 sheet)
2. Hardboard sheet (plywood)
3. A bunch of unnecessary magazines
4. Wooden block
5. Thick fabric (e.g. old jeans)
6. Stationery buttons
Let's get started!
The sheet of hardboard should be cut so that it rests peacefully in the box.
With a flick of the wrist we turn jeans into elegant breeches and cut the rest along. From the resulting piece of denim, you need to cut a strip the width of a box (or a little wider)
We glue the adhesive tape on the front of the fabric from below, put a sheet of hardboard on top, and put a stack of magazines on top of it. Securely tape everything so that it does not flutter.
On the bar, mark the width of the piece of hardboard and cut off the resulting piece. We put the whole structure in a box and with a thin drill we drill two ends of the bar. We screw the screws into the obtained hole from the outside (thereby pressing the entire structure).
From the remaining piece of the bar, cut four pieces (about 2-3 cm).
Now in each we drill a hole and fix them in the corners of the box on the screws. They are needed in order to pin a sheet with a target to them.
That's it! It remains only to draw a beautiful target and you can shoot!
Thanks for attention!
Original view of the author: