Have a nice time, Lord! After watching the film "Wolverine" I wanted to make the same claws as the main character. I did not make them metal, but decided to make them out of wooden sticks and syringes. Thus, make the claws retractable on hydraulics. Have a nice viewing!
Testing and manufacturing can be seen on the video:
Necessary materials:
- ice cream sticks
- 6 syringes (1 ml.)
- dropper
- fishing line
- wire
- Velcro
Step 1: First, cut out one stick in the shape of a claw, as shown in the photo. Next, glue two sticks on one stick, these will be the guides for the claw, which we did earlier. We cut off the excess with a clerical knife.
Step 2: Divide the sticks into two parts. Glue one part to the workpiece that we did earlier, and the second to a new stick. We perform the same procedure again. And we get the blank, as shown in the photo. (Easier to understand from a photo or video
)
Step 3: Glue the two sticks together, this will be the base. Next, glue the guides to them, which were done in 2 steps.
Step 4: Glue the sticks as shown in the photo. Then glue the syringe. We make three such blanks.
Step 5: We make small “ears” from the wire and pull the fishing line. This is necessary so that the claw extends.
Step 6: Join the three blanks using other sticks. Glue Velcro so that the claws are held on the hand.
We make such a blank. And we connect the syringes with tubes from the dropper, and fill them with liquid.
AND THERE IS OUR CLAWS OF THE WOLTERS READY!
