Good day to all dear friends! In today's article, I would like to show you a rather simple, but very interesting and possibly even useful homemade. I think many people now know that lately homemade products from ordinary corrugated cardboard have become very popular, with it you can do almost any projects and things, some craftsmen even make car models from cardboard, this is actually very cool. In general, today we will try to make a simple candy dispenser dragee from corrugated cardboard do it yourself, this dispenser has two separate containers for storing sweets at once, and as you know, it can serve them separately.
Well, I think it's enough to chat, the homemade product is very interesting, let's go!
And so, for this cardboard dispenser we will need:
corrugated cardboard (the more the better)
-orc glass or transparent, flexible plastic
Of the tools we will also need:
-stationery knife
-scissors
pencil or marker
-compass
-therm glue
Oddly enough, materials and tools need quite a bit, there are not even ice cream sticks that are used in most such projects.
Well, the first thing you need to cut out 24 rectangles from corrugated cardboard, the dimensions of which are shown in the photo below:
Then you need to cut sixteen identical rectangles from the same corrugated cardboard, their sizes are also shown in the photo below:
Glue them together in four pieces and get 4 equal blanks:
The first six and the last four blanks must be glued with a glue term between each other, something like a box should turn out:
From corrugated cardboard we cut three identical sheets, the dimensions of which should be 22 by 12 centimeters:
Glue them on the previous blank as shown in the photo:
Now, on the resulting roof, you need to glue several parts as shown in the photo below, all sizes are also in the photo:
Let's take a compass on the long rectangle that is in the center of the upper structure (this should not be glued, it should just lie and move forward and backward freely), draw and cut two equal circles at the borders with the end of the roof, we don’t throw out the cut-out rounds, they will still be needed:
On top we put and glue another rectangle with cut holes, they should coincide with the holes on the moving part:
Kruglyashki, which were cut earlier, but not thrown out, are glued on the sides of the moving part, these will be the handles of the structure:
We install the sides of the containers for storing sweets, which should be cut all from the same corrugated cardboard, they should be of equal size:
We put partitions:
We cut out two rectangles from corrugated cardboard and carefully remove the top layer of cardboard from them, in order to get an elastic blank. Then we glue them inside the containers, so that we get a certain slide for sweets:
We make two more slides, but now a slightly different type and glue them on the sides of the structure as shown in the photo:
Decorate:
Glue a smaller piece of cardboard with a narrow side to a sheet of corrugated cardboard. It will be a cover for the constitution, of course, if you want, you can make a more interesting version, but as for me, this option is the simplest:
We fall asleep sweets, by the way it is best to cover the containers with food foil, so that this whole thing is more hygienic:
That's it! A simple dispenser for sweets is ready and it remains only to test it. To do this, just grab the handle from the side with the necessary sweets and take it back, after that the sweets will sprinkle on the slides, then simply return the handle to its original position and you can do it again, on the other hand the principle is exactly the same.
Homemade is very interesting and simple, I think many will want to do something like this.
Here is a video from the author with a detailed assembly and testing of this homemade product:
Well, thank you all for your attention and good luck in future projects!