» Musical instruments »Do it yourself electric guitar

Do it yourself electric guitar






In this article, we will tell the wizard how to make do it yourself electric guitar.
By manufacturing is meant the manufacture of the case, and the master purchased all the filling in the store.

Tools and materials:
-Wood;
-Set for electric guitar;
-Computer with software;
-Glue;
-Paper;
-Skobel;
-Sandpaper;
-Set of tools for working on wood;
-Nails;
-Hammer;
-String;
- Jigsaw;
-Vise;
-Drill;
-Calipers;
Cutter;
-Paint;
-Brush;

Step One: Project
Using a computer program, the master made a sketch of the guitar.

Do it yourself electric guitar

Step Two: Template
I printed out a body and neck template with technological holes and stuck it on the board.




Step Three: Vulture
The back of the neck was formed using a staple, then treated with sandpaper.




Adds a picture to the front of the neck.



Jigsaw makes cuts in harmony.



Cut and paste the head of the neck.


Step Four: Case
On the body cuts out all the necessary technological holes.










Makes the neck and body fit.



Step Five: electronics
Installs the electronic part.




Step Six: Lower Deck
Cuts and sets the lower deck.




Seventh step: staining
Empirically selects the desired color of the coating.









Apply paint to the body.




The electric guitar is ready.


6
6.6
5.8

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
25 comments
Quote: roversochi
The position of the neck relative to the body does not change at all. At least go to the music store, look at the real guitar. Is free.

The position of the neck of the relative hull changes. There, the strings are pulled with a sickly force. And the tree can "lead". For a long time with my son they made an electric guitar. From a solid board with an additive on the body (on the bank). Did, did ...and then they gave it to the beginning guitarist. From our own experience - it is better to take a broken one (base) and finish it. Now it’s full of these electric guitars.
Author
And you there too.
Quote: pogranec
to adjust the position of the neck relative to the body

Quote: pogranec
I ask again in the Plane does not change position?


You have problems with the Russian language and geometry.
To continue dialogue with you, I see no reason.
Good luck in all your endeavors, "sofa" master :)
Author
You are not the first such "smart" here. You have claims to rewrite the text, no to the text "come on, goodbye"
Author
Enrage people are trying to build themselves smart and like to broadcast labels on all. What is Kirkorism? Did Kirkorov step in your ear?
I ask again in Planes does not change position?
Quote: pogranec
And even in the plane does not change?

Changing the neck geometry (warping) does not change its position relative to the body. Just like your Kirkorism does not affect your "skill" in the manufacture of guitars. From the word "completely."
Author
And even in the plane does not change? By the way, if you wrote a part of my comment, do not forget about the second one.
Deflection, I mean, deflection.
Author
Yes you are straight Nostradamus, you guess everything. You would be better off reading the rules for posting articles and guessing it would not be necessary. Search and add homemade products from third-party sites
Quote: pogranec
Here you are a bore Ivan. A guitar anchor bolt is needed to adjust the position of the neck relative to the body.

The author, you are talking about technical nonsense. The position of the neck relative to the body does not change at all. At least go to the music store, look at the real guitar. Is free.
Quote: pogranec
Naturally not me. And this is stated in the article. And before you teach me, remember the proverb "Do not go to someone else’s monastery with their charter"

That is, about the "cut the dough on plagiarism" and about the "wrong hands" I guessed. This is not your work, you simply skirkor idea, but unlike Kirkorov, did not do anything. And you are not talking about the monastery at all, because, unlike you, my hands are growing from my shoulders :)
Author
Ivan, I have already described the manufacture of musical instruments and guitars, too.
Author
I am not telling, but retelling. Presentation with an element of the composition-)))
Quote: pogranec
On guitars with nylon strings it may not be at all.

What does this have to do with it? You are not talking about such a guitar.
Stiffness is a more important task. The adjustment is secondary.
pogranecHave you read something yet? And that’s good.))
Author
And neither the first nor the second. Anchor in this case performs these two parallel tasks. And if one of them is not solved, then there is no sense in it. On guitars with nylon strings it may not be at all.
And where is the author about the anchor bolt, besides the promise to talk about it further?
Anchor rod is primarily needed to ensure rigidity of the neck, and secondly - to adjust the deflection.
I may be a bore, but you undertake to retell things about which you have a very vague idea. And why? What and who benefits from this? What's the point? Is that to increase world entropy?
Author
Here you are a bore Ivan. A guitar anchor bolt is needed to adjust the position of the neck relative to the body. What does it change? I’ll add, otherwise you will start advising you to read books. Deflection, I mean, deflection.
Quote: pogranec
Neither when attaching the head, nor when attaching the neck.
Anchor rod is not needed for fastening.
Author
Naturally not me.And this is stated in the article. And before you teach me, remember the proverb "Do not go to someone else’s monastery with their charter"
Quote: pogranec
The master does not write about the bolt specifically. Neither when attaching the head, nor when attaching the neck. Some common words.

That is, it was not you who did the guitar, but someone else? And you stupidly cut the dough on plagiarism? * facepalm *

Then rename the article to
"Making an electric guitar with ALIEN hands"
Author
What is there to pry? Anchor bolt. The master does not write about the bolt specifically. Neither when attaching the head, nor when attaching the neck. Some common words.
Quote: pogranec
anchor (if you mean the connection of the head with the bar)

No, I mean the anchor. Just wonder what it is. )))
Author
Walnut lower deck, ebony fingerboard, limb case, maple head. About the anchor (if you mean the connection of the head with the bar), the master writes practically nothing. Good luck in making the guitar-)))
Author
Especially for you, Ivan. Black Limba case, curly / bird's eye maple neck, ebony mushroom correctly translate later. I'll see about the anchor later, no time, I'm leaving.
Tools and materials:
-Wood;
Yeah, just like that: wood. )) Any.)))
And not a word about the anchor!

We advise you to read:

Hand it for the smartphone ...