» From sites » Specialist »Sword from the game Assassin s Creed Odyssey

Assassin s Creed Odyssey Sword


This sword was designed after the snake sword concept concept found in the Cosplay Guidelines released by Ubisoft for their 2018 Assassin's Creed Odyssey video game.

Requirements
1.3D printer
2.thread
3.Glue
4. Clips
5. Primer
6. Metallic silver, metallic black and metallic brass. Metal spray paint is optional.
7.Acrylic black paint
8. Tape for artists
9.Gloves (optional)
10. Sand paper of various grades
11. Filler (such as wood filler)

Step 1: print the design
Print each part 0.3 mm thick with 15% coverage. For more accurate fittings, print a layer height of 0.2 mm with 20% coverage. The design has been divided into several parts to simplify printing and reduce the number of supported printers.

Step 2: Build the Design



Once all the parts are printed, start gluing the pieces together. Each fragment of the file is numbered to glue the pieces in order. Use the clamps to hold the pieces together as the glue dries. I recommend giving glued pieces 24-48 hours to dry and install completely.

Step 3: Post-Processing
1). Once the glue is fully installed, use filler to fill the joints of the structure. Pour filler if necessary.

2). Apply primer. Sand the primer after drying. I like wet sand because it produces less dust, a longer sandpaper life and provides a smoother surface than dry sanding. Apply an additional primer as needed and repeat the grinding procedure as necessary.

Step 4: painting the blade

1). In a well-ventilated area, start painting the blade with a black basecoat. I recommend wearing latex gloves so as not to put paint on your hands if you have not hung a print for drawing.
2). Using silver metallic spray paint, quickly pass a short distance from the blade.
3). Repeat step 2 with black paint.
4). Repeat steps 2 and 3 until you have a galvanized metal surface. Change the distance you hold the paint from the blade for each color skip.

Step 5: painting the pen
1). Lubricate the top of the blade below the handle. This will help you accidentally paint the blade with pen colors.

2). Start with a spray paint pen. I have finished switching between brass and copper colors for the chameleon effect.


Step 6: Add A Dirt Effect.

Only new swords are shiny.A used sword will have some affection for it. Use some black acrylic paint to rub the black paint into the low spots and edges of the structure. Wipe off excess paint.

Step 7: Add Edge Details


With silver paint, paint the edges of the structure. These are mainly elevated areas of design.

Step 8: Final Results

6.7
6
7.3

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
5 comments
But seriously, you don’t need to stupidly stuff the text into the translator, and without even reading, send it to the site ...
-I give a master class on stuffing text into a translator and pushing a digestible text out of it-)))
Such pearls pop up as a translator -
Now seal the entire edge with glue for glue.
And what to do next with it? Make it "to be"?
This is not a banter! I just really don’t understand why this is ... Hang on the carpet?))))
... I would not hang too! I understand that he is from the game! That the sword is "not real", and created specifically "non-standard" ....
But its shape !!! It was somehow specially created in order to complicate the life of its owner and make it shorter!)))) .... Maybe I’m a burnt pragmatist, but as a person who knows a little the basics of knife fighting, I’ll say that with such I wouldn’t go to battle with a sword - they’ll kill the hell in the first fight !!! Because, any sword is, first and foremost, a stabbing and cutting weapon (chopping with swords is only in the movies! In a real fight, a chopping blow was infrequently inflicted, as a rule, only with an equestrian attack on an infantry, or, if in an equal position as a distracting and "stunning" maneuver. The deadly ones are only stabbing and cutting!). It’s not very convenient to stab them with such a shape of the blade ... The accuracy of the injection suffers unambiguously ... As for the “main occupation” of all blades - cutting strokes, this is limited by “lack of space”. After all, the protective bracket is designed to protect the fingers from the cutting blow of the opponent’s blade when it slides off the blade. More skilled fencers used checkers - there is no bracket for the sake of a quick change of grip. (But you need to be able to do this !!!!) The same sword and grip does not allow you to change quickly (And indeed it does not!), And your fingers do not protect! So, at the first attempt to reject the opponent’s blade, its owner will lose fingers ... AND EVERYTHING !!! shok
So, everyone who sees this model of the “blade” at me will not admire its shape, that's for sure .... Rather, they will laugh ...
It’s not clear ... But why the hell do you do it? Where is it then?
Kasyak overlooked. A warning has been issued to the author of the post.
You can also try
Thanks for the "neighing"))))
But seriously, you don’t need to stupidly stuff the text into the translator, and without even reading, send it to the site ...
Of course, no matter what the line is, the pearl !!! But here I especially liked:
6. Metallic silver, metallic black and metallic brass. Metal spray paint is optional.

But yes! For spraying - it is not necessary at all !! )))) The main thing is metal brass !!! )))
The design has been divided into several parts to simplify printing and reduce the number of supported printers.

And it’s true, so many of these supported printers have already divorced !!! Something must be done with this !!! )))
Step 3:
Post-processing

And where is the processing before processing ??? Unclear...
1).
Once the glue is fully installed, use filler to fill the joints of the structure. Pour filler if necessary.

As my grandmother said: "Although I am your grandmother - but I am your grandmother !!!"
1). In a well-ventilated area, start painting the blade with a black basecoat. I recommend wearing latex gloves, so as not to put paint on your hands, if you did not hang a print for drawing.

If you wear Latin gloves, and at the same time hang a print, then you will definitely want to start drawing various blades !!!
2). Using silver metallic spray paint, quickly pass a short distance from the blade.

If your paint is not silver, not metallic at the same time. and not aerosol, then quickly go past the blade with your feet !!!
1). Lubricate the top of the blade below the handle. This will help you accidentally paint the blade with pen colors.

So, by chance, the blades are painted with colors for the pen !!! And you need to lubricate, judging by the photo, a blue electrical tape !!! This is generally a universal lubricant !!!
2). Start with a spray paint pen.
Well, how can you not start the pen if you are with spray paint? !!!
A used sword will have some affection for it.

Who is he?!!! Who is this man to whom even swords have some tenderness ???
boss

We advise you to read:

Hand it for the smartphone ...