» Topics » Questions »Converting a screwdriver to li - ion

Remaking a screwdriver on li - ion

I ask for advice. There are lithium batteries BPK265-001-01-B from the payment terminal. I would like to put in a screwdriver but the task is how to charge it later. On banks on the side there is a board (it seems to be protection) and I can not find descriptions of what it is. Who will advise what. I would like to use these banks with this board.
Question \ topic is automatically published in the social. site network - stay tuned for answers there:

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
If you use these batteries, then the built-in protection must be removed. It will fire. A screwdriver often in peak can take about 40 amperes. Prada is most likely designed for a current of about one.
If you do not bother, as I did, it will turn out:
https://enm.imdmyself.com/index.php?newsid=11244
and a charger for it:
https://enm.imdmyself.com/index.php?newsid=11317
On banks on the side there is a board (it seems to be protection) and I can not find descriptions of what it is.
With a probability of 99.9999%, this is a BMS (Battery Monitoring System). BMS is designed for emergency protection. For use in a screwdriver, you need a BMS board for 3-4 cells and a charge controller (not in the screw, but outside). You can read, for example, here, including comments.

We advise you to read:

Hand it for the smartphone ...