To make such glasses you need
From materials:
1. two large and two small bottles
2. ice cream sticks
3. rubber bands
From tools: soldering iron, double-sided knife, adhesive tape, syringe
First you need a big bottle. From it you need to remove the cap, attach it at the base of the bottle and cut it out. Such blanks will need 4.
Now you need to slightly warm up the soldering iron (180 - 200 degrees). After that, you need to fold the blanks as the author shows and gently solder the edges.
Here is what should end up. These will be the lenses.
As you may have noticed, the ends are not soldered to the workpieces. Inside the lens you need to inject water. Water can be injected with a syringe.
After this, all the workpieces must be sealed.
Two bottles (small) need to cut off the top. After that, you need to unscrew the lids, put the lenses inside and fix them with glue.
On sticks of ice cream you need to glue on double-sided tape, and then glue out to the blanks.
Now all that’s left is to download the video and fix the phone to the rubber bands
That's all! virtual reality glasses are ready! Thanks for attention
Original video by the author: