To make such game buttons you will need:
1. coffee sticks
2. 3 screws
3. postings
4. Double-sided tape
5. a pen
6. foil
In order to start manufacturing, it is necessary to make 7 such sticks 3.5 cm long.
The first step is to make such a “sandwich” of 3 sticks. Then take two sticks, smear their ends and stick as shown in the photo. This design will serve as a housing
At the old handle, you need to cut a piece of the rod and stick it as in the photo, and glue another stick on top. It will be a button
Now in the case you need to make several holes, then put a button between them and fix it with a skewer.
Now on each stick of the case you need to glue a piece of double-sided tape as the author shows in the photo.
After that, you will need to drill a hole in the leading part of the body. Then you will need to wind the wires to the screw, and then screw it into the hole made earlier.
Now you need to carefully bend the wires and attach it to double-sided tape. On a double-sided tape, you need to glue a piece of foil, and then cut off everything unnecessary.
Then you need to drill more holes, and tighten the screws there (as shown in the photo)
After that, you will need to glue a piece of regular adhesive tape on double-sided tape (to cover the sticky side).
And the last step is to disassemble the handle to get the spring out of it. The spring must be cut and inserted into its rightful place.
Well, that’s it, the game buttons are ready. Thank you all for your attention!
Original video of the author: