If you have an old satellite dish lying around, do not rush to throw it away, you can make a bird bath out of it or just a small fountain. Let's watch a short video.
To make such a bird pool, the Master used the following
Tools and materials:
-Satellite plate;
- Submersible pump;
-Hose;
-Aerosol paint;
-Spray;
-Plastic capacity;
-Plastic tube;
-Screwdriver;
-Knife;
- Hacksaw for metal;
-Drill;
-Drill;
-Level;
-Respirator;
Step One: Hole
In the center of the satellite dish, the master drills a hole. The diameter of the hole is slightly larger than the diameter of the plastic tube.
Step Two: Head
For homemade the master also uses the housing from the head of the satellite dish. Disassembles the case, removes the inside.
Step Three: Painting
The satellite dish and head housing are painted in blue.
Step Four: Drain Pipe
The plastic tube is threaded. The master installs the handset in the hole. Using a level marks the label on the tube in the same plane with the edges of the plate. Then cuts off the tube just below the mark.
Step Five: Build
Under the plate, the master places a plastic container with a pump. Water from a plate, through a drain pipe, enters the tank. Next, the pump, through the tube, supplies water to the sprayer installed in the head housing.
It remains to pour water into the plate, connect the pump to the network and the fountain / bathhouse for birds is ready.
