it device The master made for photographing from water. As you can see from the photos, the picture is obtained, as if framed by a frame of water. How the master has achieved such an effect will be discussed in this article.
Tools and materials:
-GoPro camera;
-Selfie stick;
-Two GoPro mounting screws;
-Adapter;
-Nut;
-DVD disk;
-Rubber gasket;
-Two metal washers;
-Bar 60 * 65 mm;
-Screw with nut M5;
-Drill;
- Drill 7 mm;
Step One: Bracket
The first step is the master drills one of the holes in the corner bracket.
Step Two: CD
Secures the disc to the bracket.
Step Three: Mounts
Now you need to fix the two mounts. One for the camera, the other for a selfie stick.
Step Four: Install the Camera
Installs a GoPro camera and selfie stick.
Everything is ready, now you need to explain the principle of the device.
For shooting, you must become in shallow water and quickly lower the device with the camera input. At the moment when the device is below the water level, and the water has not yet time to fill the camera, you need to shoot.
In order to catch this moment, you can configure the camera to shoot continuous mode or video.
A simpler version of the device is to mount the camera on the disk using ordinary stationery rubber bands.