» Car DIY » Bicycles »Scooter based on a DIY battery grinder

Do it yourself scooter

Hello dear the inhabitants of our site!
What just did not come up with on the basis of the grinder. The author of the channel "Make it Extreme" continues to amaze with unusual homemade products. This time he made a scooter based on a cordless grinder.

It is also important that the grinder does not suffer, it can be installed on a scooter in a matter of seconds.

Instruments.
1. The Bulgarian.
2. The welding machine.
3. The lathe.
4. Band saw.
5. Grinder.
6. Drilling machine, crowns and drills.
7. Wrench, wrenches.
8. Screwdriver.
9. Bending machine.

Materials
1. Aluminum strip.
2. Clutch from an old lawn mower.
3. Wheels.
4. Cordless grinder.
5. Aluminum pipe.
6. Stud, nuts, washers.
7. Steel round timber.
So, the author begins by parsing the old lawn mower, he will need the rear axle and grip.




Removes old wheels.





Removes an unnecessary shaft from the clutch unit.




These wheels will be installed. And this battery grinder.

Starts to make a frame from an aluminum strip. Bends her not bending machine.




Using a band saw, cuts off unnecessary parts.




It processes on the grinder, polishes the edges.


These are the details of the frame.

Cuts a piece of aluminum pipe on a lathe.


In the frame element, with the help of a drilling machine and a crown, makes seating for the pipe.


It connects the frame to the pipe, threaded through the hairpin and secured with a nut.




Squeezes with a wrench.


Trying on the rear axle.


These bearings will be used.


Installs the rear axle with the clutch unit in the frame.





Turns bushings for wheels on a lathe.



Puts on wheels.





The rear axle is ready.



Now you need to make a roller for the grinder.

Using a band saw, he cuts the workpiece from aluminum round timber.


It processes the workpiece on a lathe, cuts a groove for the belt.








Trying on a belt.


Installs the roller on the grinder.


Makes the seat for the grinder on the frame.




Puts on the roller, attaches the grinder to the frame.




Tightens the belt on the rollers.







It remains to make the steering wheel. Welds it from aluminum pipes.



Welds the front fork.



The clutch control knob is installed on the steering wheel, it is connected to the block itself with a cable.


Everything worked.


Spray painted.




Now you can drive.




And so you can quickly remove the grinder, and use it for its intended purpose. For example, cut down your ads.






And that’s all. Thanks to the author for another interesting idea of ​​using a grinder.
Good luck to all!
4
8
7

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
1 a comment
It is a pity that the author does not give test results, in particular, he is interested in the flight range at one gas station! smile

We advise you to read:

Hand it for the smartphone ...