» From chainsaws »DIY chainsaw brush cutter

DIY chainsaw brush cutter

Good day, dear the inhabitants of our site!
This article will be useful to everyone who has a hedge in the garden. The author of the channel "Made in Poland" will show how he made a tool for cutting bushes. As the basis, he chose the usual chain chainsaw.

Materials
- Nuts, washers, M6 bolts
- Steel strip 25 mm
- Chainsaw.

Instruments, used by the author.
- Welding machine
- Drill or screwdriver, drill
- Vise
- Bulgarian
- Wrenches, pliers
- Belt sander
- protractor
- Roulette.

In general, the idea is very simple. You just need to make a nozzle - a comb for a chainsaw. With it, the branches will not run away from the chain.
Begins to collect. Removes the cover from the chainsaw.

Measures web parameters.



Having chosen a suitable segment of a steel strip, marks it into equal segments.



With the help of a protractor makes markup at 45 degrees.



Clamps the strip in a vice and cuts off the marking with a grinder.





These are the blanks for the "teeth" of the nozzle turned out by the author.

It processes them on a belt sander, smoothing the sharp parts of the faces.



Now, from the same strip marks and cuts the longitudinal tire of attachment of the nozzle to the canvas.


Marks and drills mounting holes.




Lays out the "teeth" on the tire, checking the distance between them, welds all the parts in turn.










Checks the geometry of the finished nozzle.


Everything is ready, secures the nozzle to the canvas with M6 bolts, laying a washer grover. Tightens with a key.









It's time to start the test. Apparently, the author is very pleased with the homemade nozzle.






Thanks to the author for an interesting idea for a simple nozzle!
Good luck to everyone in the creative process!
8.4
7.1
7

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
4 commentary
And if instead of teeth from a strip, make teeth from reinforcement by 5 mm, will it be easier and the function will be performed?
A good example of how, with a little refinement, to significantly expand the capabilities of the tool. It’s a pity you can’t plus two times.
So you can get a haircut
A little shave? smile
So you can get a haircut -)))

We advise you to read:

Hand it for the smartphone ...