» Fixtures » Instruments DIY do-it-yourself nail clamp

Do-it-yourself self-clamping nail puller

Hello to you, dear readers and the inhabitants of our site!
This article will be useful for everyone using nails for installation work, or in the manufacture of homemade products. It will focus on a self-clamping nail puller.

The author of Be Creative will show how he made this simple but very useful tool.

Instrumentsused by the author.
- Grinder with metal discs and flap discs
- Vise
- Welding machine
- Screwdriver or drill
- Ruler, marker or pencil
- Ticks.

Materials
- Steel strip or plate, 10 mm thick
- Steel profile pipe 25X25 mm
- Old file
- M8 bolt with nut.

Manufacturing process.
Using a ruler and a pencil, marks two future blanks in the form of a corner on a steel plate.




Cuts workpieces using a grinder with a disc for metal.




Marks a hole at the received corners and drills it with a diameter of M8.



He tries on the obtained corner to a profile pipe, drills a hole in it.


Collects received items.





He tries on the resulting construction to an unnecessary file, marks it out.




Cut the desired piece of file, grind the edge at an angle of 45 degrees.






These are the two blanks, these will be clamps.



Welds workpieces. One to the profile pipe, the second to the corners.



As an emphasis will use here is such a segment of a steel plate. Welds it to the second edge of the corners.





Here is a capture mechanism turned out.

It's time to test the tool in action! A standard nail puller does not catch a nail without a hat. And the author’s tool easily clamps it and pulls it out in one motion.





Now he tries the nail clipper on the bracket. Everything is also successful.





Well, a serious opponent, hammered into the wall. He generally vomited with a piece of wall.



Thanks to the author for the interesting idea of ​​the tool and its implementation!

All the good tools!
9.3
8.1
7.9

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
11 comments
Nails that stick out so high can be pulled out with any articulated-tool (pliers, pincers, side cutters, etc.). In this homemade product it is difficult to control the nail clip, unlike pliers, this will either slip or bite. I pull out such nails like that. I clamp the pliers and under them a mount or nail ...
Quote: miner
if you disassemble the formwork and in a large volume, then you do not need anything other than a hammer.
There is not always access to the back side with nails not bent so that it can be dismantled with one hammer.
this is when there is nothing to do, and one nail can be tormented. and if you disassemble the formwork and in a large volume, you do not need anything other than a hammer. And thousands of nails are hammered into it.
If you drag nails from large enough planes, the surface of which is not a pity, then everything is OK.
PMSM, a similar result can be achieved by lengthening the handles of ordinary ticks.
Smiley, have you set? If not about the article, then what about?
Yes, calm down you, I'm not talking about the article. And why do you think the word "tyap-lyap" is a derogatory form?
Allow me! You quoted me in a derogatory manner. This is at least a provocation. The presented work was done hastily, anyhow, what can be seen even on the rocker arms, not to mention welding to a file, what exactly did not suit you?
Yes, I'm not talking about opinion, I'm talking about tyap.
Do you think my opinion is not objective? What are your arguments?
blunder
- xaxa somewhere I heard it-)))
I liked the idea itself. The execution and selection of materials, to put it mildly, are bewildering. Although, in spite of the general stupidity, the work is ready, I will respond positively.

We advise you to read:

Hand it for the smartphone ...