Here is such a "slide-house" I decided to share with you!
For work you will need:
Tires of different diameters - 21 pcs.
Screwdriver
Press washers approximately 150-200pcs
Shovel
A piece of an old palace
Paint (I used green, turquoise and blue paints)
For the reliability of my design, I originally dug tire holes for the tires with my shovel.
For the first row, I took R16 tires, so that in the future it was possible to climb inside the slide.
The first row of five tires, dug so that the tires of the second row lay between the tires of the first row.
Then the second row. In this row, tires R15 and R14, using a screwdriver and a press washer, fix the tires of the second row with the first. We try to fix this row of tires at a slight angle. It’s not necessary to spare the puck, it will be more reliable.
Why did I use press washers, and not self-tapping screws, for example, in my opinion they are more reliable in fixing tires, they attract tires more tightly to each other, and finally, most importantly, they are not so traumatic, the “spouts” are not as sharp as self-tapping screws.
After the second row, I remembered the palace. Clerical years cut about the size and pulled inward.
I don’t know, maybe it doesn’t matter, but I tried all the time to work, screw the washers into the wheels not from bottom to top, but from top to bottom, in my opinion this is important, such a fixation procedure should minimize the risk of injury.
Next comes the third circle, we fix everything according to the same principle as the second, at a slight angle, and the tire is tight to the tire, not sparing the preshayks.
Then the fourth row and the final tire, on top.
The question may arise why the slide turned out to be uneven. I will answer right away, it was necessary to take a larger circle, more tires would go, ideally take six tires in each row, but I didn’t allow the area of the entire child’s groove, swing at such a whopper, and now I got such a crooked one !!! But on the other hand, a reliable, test drive passed with honors.
So it remains to paint.
And you're done !!!!
Have a nice day and enjoy homemade!!!