To read 1000 fairy tales will help the built-in battery from an old phone. The mobile version of the backlight for books turned out to be convenient - there are no wires and attachment to the outlet.
A simple clothes hanger with clothespins became the basis of my homemade.
And it also took me:
- LED strip of warm glow powered by 5 V,
- aluminum corner 10x10mm 20cm long,
- Battery 1530 mAh,
- charging module for battery TR4056,
- micro switch 2 positions,
- heat shrink tube of various sizes,
- wiring for soldering.
The toolbox is also minimal.: soldering iron, glue gun and building hair dryer.
Assembly. We disassemble the hanger, remove all unnecessary and bend, as in the photo. In the corner we drill two holes for mounting. Before attaching the corner, we put on the hanger a heat shrink of the desired diameter.
The clothespins on the hanger have two functions: they attach the lamp to the binding of the book, and we attach the battery to them using heat shrinkage.
For the latter, in the shrink, you will have to make two holes in advance for the clothespins, and one more on the reverse side - for the LEDs on the board (battery indication).
Thanks to the Chinese charging module electronic to assemble the component is not a big effort. I glued all the details with a glue gun.
We glue the LED strip, observing the polarity.
The final and crucial part is to install heat shrink tubes.
The lamp is ready to go! Fastens with two clothespins easily and reliably. When turning pages, it does not interfere, as it easily leans back. You can set the desired angle of illumination. Enjoy your reading!
