I love onions, lots of fried onions. In my private house, a large kitchen is combined with the entrance hall, i.e. as such. - there is no door - there is a wide arched opening.
I switched to the use of multicookers a long time ago, and although (in a sense) the steam outlet valve partially restrains the smells of cooked food plus ventilation from an open window, then in winter, plus winter clothes and a closed window - it often happened that the family smelled of extraneous buzz.
This fall, I specifically thought about it, and the other day, two ionizers came to my test. With their help, I hoped to precipitate harsh odors and, unlike last winter, consume kilograms of onions more than once a week, but on any day I want to =)
Looking ahead, I also note that above the gas stove there is a productive Bosch hood, but I basically do not want srach on the gas surface. I am satisfied with saving time and a minimum of attention to cooking, and besides, exactly since 2006, I have inseparable, selfless love with the products of harsh Japanese engineers, a multicooker - a peasant appliance made by men and for men.
I left one more empty case from the gas detector, and quickly soldering the wires, I hung this little thing under the ceiling and hellishly fried dumplings with onions. But before that, I lifted a faulty door from the end of the brush - at the moment the glass touched the brush - the door glowed softly and briefly at the point of contact - i.e. the generator does work.
The device worked during cooking and after, it seemed to me that the smell did not spread on such a scale, in addition, it remained muffled. I interviewed home - they confirmed that if this is so, then this terrorism can be endured.
I planned to put another ionizer in one other place, I’ll say right away, he didn’t get into that place - I decided to use it in the kitchen. But unlike the first, find him a more convenient body.
Many of us have a bunch of low voltage power supplies, I have this bunch too.
Gently tapping with a hammer around the perimeter of gluing the power supply, I opened it
At first, I wanted to make holes with metal vent plugs for of furniturebut quickly rejected the idea.
In general, marking with a pencil, I took up the dremel.
Soldered the network wires of the ionizer with a body plug.
At the bottom of the fork half, glued a piece of linoleum.
And he decided to support the generator with an ion-glued spacer made of foam polystyrene and from another piece with an oblique slit fit the holder for the wiring electrode.
If this looks somewhat phallocentric, I will not argue.
With a few drops of glue, I fixed this picturesque installation.
Also, having applied glue in places to the body ebbs, I connected both halves of the body
and
As a result, I got a portable ionizer, which is guaranteed not to discharge into a fist, in which I clamped it, working from the network, this way and that.
While the ionizer was without the second half of the case, I, fearing a discharge in my ear, listened carefully to it. The generator emitted a low-frequency hiss resembling the sound of melting margarine under a covered lid. After assembling, covering the upper part of the body with my ear, I heard that the tighter I hold my ear, the lower the tonality of the generator - the sound was like the sound of forced air idling an operating aquarium compressor.
At night, I move this ionizer closer to the head of the bed, and it seems to me that I have become sweeter to sleep than usual.
And besides, it seems to me that I noticed an effect, I don’t know how to put it another way - “a clear, clean nostril”, and this despite the fact that I did not notice the smell of ozone, as I did not smell the new thing. Like this. =)
p.s. took it.