» Materials » Epoxy »Epoxy figures (easy manufacturing method)

Epoxy figures (easy manufacturing method)



This is the head of Socrates was cast in epoxy. The mold was cast from a magnet onto a refrigerator.

The original head is placed in a container and filled with silicone.



After two hours, the mold is removed from the container. And the original head is pulled out of the form.





The epoxy resin with the hardener is mixed and poured into the mold.




After the resin hardens, the figure is taken out and ground.





Everything is ready, quick and easy. For illumination, you can place the LED back on the figures.


0
0
0

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...