To listen to music, the volume of the phone speaker may not be enough. For those who like to listen to music louder, The Wrench will show you how to make a wired speaker for your phone.
Homemade video video:
To create this homemade we will need:
1. The speaker power from 5 to 20W
2. The switch
3. Cardboard box or any other case
4. Mosfet IRFZ 44N
5. Resistor 10 kOhm
6. Capacitor 50 volt 1 uF
7. Wire
8. Battery type crown 9 Volt
9. Wire with aux connector
10. Connector for crown
Let's get started!
1. Make markings on the box and cut a hole for the speaker.
2. Solder the wires to the speaker and glue it to the box.
3. We take the mosfet and solder as shown in the photo. Solder the resistor, capacitor, speaker, connector for the crown.
4. Cut out the hole for the switch and insert the switch. Solder the switch and wire with aux connector. Gently glue all the insides in the box. Putting the box together and done!
Advice:
1. Do not take the speaker too powerful
2. Do all actions with a soldering iron very carefully