The method, which is described below, allows not only to clean the plastic of the car interior from impurities and give its appearance a novelty effect, but also to reduce the adhesion of dust to it in the future. And it’s ridiculous to talk about the costs of the funds used.
In order to clean the plastic surfaces of the passenger compartment auto will need:
1. A bucket of warm water
2. Old sponge or whirlwind
3. Laundry soap
4. A piece of dense, lint-free fabric.
Interior cleaning is very simple:
1. A whirlwind is dipped into water and abundantly, until foam is formed, all its sides are soaped.
2. Apply a soapy soap solution with a thick layer on all plastic surfaces of the passenger compartment. Effective washing of dirt with such a solution is especially noticeable on light plastic - soap foam literally blackens.
3. Having covered with soapy foamy solution all the plastic surfaces of the cabin wait until the soap has completely “corroded” the impurities present on them and the dirt will peel off from the plastic. Usually 5-10 minutes are enough for this.
4. After a break with a damp, dense and lint-free cloth, carefully wash the soap foam from the plastic.
The rag should be just without lint, otherwise its fibers will remain on the wiped surfaces. They do not use water at the same time; there is enough moisture that the rag cloth contains.
5. The soap-free plastic looks fresh and clean, almost like new.
So, easily, quickly, without any special “wet processes” and at a pretty penny cost, you can clean the contaminated plastic surfaces of the cabin. By the way, this method available to everyone is recommended by an experienced car washer. Only soap must be used household, with a high content of alkalis and acids. The content of fatty acids in such a soap reaches 72% and, probably, this allows it to “deal with” soiling with plastic so effectively and update its appearance.
A video on the application of the above-described method of cleaning plastic inside the car.