Hello everyone, today I will tell you how the master made a wooden typewriter.
Materials and tools:
1. Saw
2. File
3. Plywood 12mm and 4mm
4. Wood glue
5. Drill
1. Print the machine drawing on paper.
Take the plywood sheet of the required thickness, as indicated in the photo, and cut it to size so that the cut parts take up more space on the plywood to save material.
2. Next, the author cuts out all the parts, it is necessary to cut it carefully so that in the future less cut is cut.
3. After all the details are cut, the author started grinding.
4. Next, the author glued all the parts and, after drying, polished the hood, roof and trunk floor.
5. The wheels were also cut out of plywood and mounted on the machine, then the axles were cut.
6. The author covered the machine with special oil.