I was prompted to create this model by blueprints from an album entitled “SB Variations” on the website of Sergey Alexandrov from Nizhny Novgorod, my teacher and mentor.
Sergey has a lot to find various topics for the construction of original aircraft models.
I advise you to visit his site or him more often.
In addition, I searched the Internet for similar designs by foreign authors.
When I started building this model , I consulted with Sergey, that's what he said: - “An interesting model. Reminds me of my sketches for the competition for the average bomber. There were only two keels there. With keels, the model should fly without electronics. ”
And so, Sergey said - I did.
At first I made a small model from the ceiling tiles and checked how she behaves in the air? The model was well planned and steadily kept in flight.
Made a drawing, if you can call it a drawing,
chose a scale, put down the sizes and began to cut, cut and glue ...
In principle, there is nothing incomprehensible here. The model is very easy to perform.
Once upon a time, I was already building a similar model, it flew beautifully.
In this model, I tried not to repeat the mistakes made earlier.
Started from the bottom plane of the fuselage. The whole model is built from a simple sheet substrate for a laminate with a size of 1000 mm X 500 mm. X 5 mm. Everything is glued with universal KIN glue or any glue for ceiling tiles.
Then he made two wings. I inserted pieces of foam baseboard into the wings to create a profile.
Trying wings on the fuselage.
I attach "ears" to the wings, according to the drawing.
I glue the finished wings to the bottom surface of the fuselage and immediately fit with black tape.
I glue the intermediate plane between the upper and lower surfaces of the fuselage.
Cabin manufacture and design - depends on your imagination. I got it like this.
That's how the side lights work - BANO.
For a good mood when building a model - a bit of humor.
And these are my assistants - the General Designer and the Chief Designer ...
Chassis can not be put. If there is no runway, let go of the hand.
General sometimes allows himself such "tricks".
Dimensions of the model depend on the motor.
My model. Swipe 980 mm. Length - 1200 mm. Weight (flight) - about 500 g. With 1620 motor thrust. Turnigy L3010C-1300KV (420W) Three-blade propeller 8 X 4,5.
All a good flight.
