Now The Wrench will show us how to make a small radio-controlled car with an FPV camera.
To create this homemade we will need:
1. FPV camera
2. Receiver for FPV camera for smartphone
3. Electric motor
4. Battery
5. Wire
6. Steel wire
7. Plastic wheels
8. Battery Connectors
9. Plywood
10. Microchip and radio remote control
Let's get started!
1. Cut a piece of plywood, which will be our foundation. We cut two identical pieces from the wire and glue it on plywood.
2. Cut a smaller piece and glue it on the base. We glue the motors.
3. Glue the chip and solder the wires.
4. Fasten the camera to double tape. We glue the battery and connect the connector. We fix the wheels and put on elastic bands. Done!
