They threw it on the closet - and let it lie there, but what is unaesthetic - does this concern you? Or, if she is by the belt - and she is hanging on a hook diagonally? But the author of Instructables under the nickname Thewoodworkingkid made an original mount for the guitar so that it occupies a strictly vertical position.
Well, you’ve already seen it all on the KDPV, and now we’ll look at both of its details separately:
In order not to rash a lot of questions, I warn you from the threshold: all sizes are in inches. Both parts are two thick, four wide, one six, the other eight long. In the first one, the master makes a notch in the form of a neck, as in the photo, processes both with an emery cloth, and now something is already visible:
Well, in that part, which is eight inches long, it makes a groove half an inch deep, an inch wide, and shouts to the reader: repeat after me! Marks in front:
Then on the side:
There are two planes! There is a shallow groove!
Now let the glue do its job:
Glued - handle the putty boldly! Then - paint!
And on the wall - grunt!
Well, then the master double-sided tape offers:
But such a translator does not approve, and apologizes for the verb rhyme, which, according to art critics, is not at all cool. Only classic - self-tapping screws with dowels. And your guitar will last for years!