Make fun composition of nails and nutsTo decorate your interior or present to someone - this is not at all a difficult task. We call it "Two people at the game of checkers."
First, find two nails (no more than 50mm) and four small nuts. You will also need several smaller nails. The nails are bent with pliers, repeating the shape of the seated people. Two nuts are installed on the rib - these will be chairs. The remaining two will be the basis for the table. Miniature checkers are installed on it. The chessboard, behind which the games are played, is made of a square piece of cardboard, and the checkers themselves are made of smaller nails that have been bitten off with the help of nippers. To fix all structural elements to each other, you can use spot welding or special glue.
Many interesting crafts can be made of metal wire. Flexible and durable material allows you to create any form and design.
To make do it yourself butterfly wire and varnish You will need to make very little effort. First you need to make a butterfly frame. It is most convenient to do the work in parts: assemble two wings separately, and then attach them to the body. Do not choose too thick a wire for crafts - the thinner the wire, the more accurate the butterfly will look. Now that the frame is ready, you can begin to work with varnish. A brush should go along the inside of the wing to be filled. Then it follows, having dipped the brush abundantly in the varnish, stretch the drop over the entire surface to be filled. The first time you may not succeed, but when the butterfly regains new beautiful wings, you will get real satisfaction from the work done.
Insects often interfere with our daily lives. But made by yourself paper clip fly, traffic jams and salt shakers certainly will not bring you any trouble, becoming your favorite craft.
Let’s assemble the body of a fly - for this we connect two corks with the letter “T” using glue.
Then straighten a dozen paper clips - they will serve as material for the manufacture of various parts of the insect.By bending the paper clips in the way you need, we will prepare the blanks of two wings and legs of the fly. The eyes of our craft will look gorgeous if they are made of two covers taken from salt shakers or pepperboxes. The last stage of work is the connection of all parts together using all the same straightened staples. The fly is ready to fly!
Now it’s worth showing that useful crafts can also be made from metal. Take, for example, an unnecessary spoon - how many of it can be made of various interesting and original things. One of these crafts is key hook.
A lonely spoon has long been lying in your table - great! You should also find a block that will serve as the basis for the entire simple structure. Spoon (or fork to taste) with glue is attached to the bar, which in turn is fixed to the wall. Fasteners are made with screws or screws. Do not “tightly” screw the workpiece to the wall - because this hook is made specifically for the keys and is not able to withstand heavy weight.
Metal goes well with natural materials, and crafts made from these combinations are distinguished by their interesting appearance. To make pot of metal can and wooden paper clips You will need a minimum of materials and effort. The top of the tin can is cleaned from sharp edges so that further work with the product is safe. Then, wooden clothespins are attached to the walls of the metal base (with the clamp down), forming a circle around the can. The pot is ready, now it only became to fill it with earth and plant seeds.
Also, metal products can be combined with each other to create more interesting and original crafts. Insectdo it yourself from wire and paper clips - vivid confirmation of this. Only in addition to the above material for the body of the future crafts will need another brush. All parts of the insect are collected separately - four wings, two eyes, nose and legs. The frame of the wings is made of wire, and the middle of the paper clips. The nose and legs of the craft are made of a more durable material - wire. A cylindrical casing is put on the handle of the brush (it can be any unnecessary part or spare part from something), which is flattened at the base. The connection of all parts is carried out by bonding staples and wire to each other. A little imagination and patience, and you already have a new kind of insect in your hands.
Many crafts, decorations and household items can be made from metal clips, wire or other products. It is enough for this to have a minimal set of tools and basic skills to work with this material. Do not be afraid to start - remember that “eyes are afraid, but hands do”