Sharpening machine: ЗС-220-180-1350
Start of work: 01/25/2009.
Collected: 01/30/2009.
Time spent: ~ a couple of evenings.
So another completed project.
Tool-grinding machine ZS-220-180-1350
Assembled on an engine from an old Vyatka type washing machine. For a long time this engine was lying in the garage, and finally his hands reached him. Gathered in two evenings, the first evening went to the engine mount to the base, a selection of Conders and the search for a connection scheme in net on the mobile. Over the second evening, the faceplates and sleeve were machined for mounting the abrasive disk on the shaft, installing a switch and an additional outlet.
Engine data:
Induction motor
type АВЕ-071-4С УХЛ4
50Hz 180W cos & 0.90 1350rpm
1P10 ~ 220V 1.5A Efficiency 60% S3
Capacitors:
MBGO-1 1mkF / 600V * 4 pieces.
Photos with a black base belong to the first initial version. Then I had to rebuild the machine on a different basis, because the previous version was a bit in the puddle and the base was swollen, and to save space we threw out the sockets so that the machine could fit in the cabinet.
After the photos, two videos on the assembly.
Assembly video (cutting photos with a description)
Video with an accelerated shooting of the machine assembly:
of this machine from 2009