“Shket” is a boy, a teenager, a boy, a boy, a boy, a boy, a boy, a boy, a boy, a stripper, a boy, a boy, a kid, a short man, a child, a youngster
.Detzl is an abbreviation of the word "decimeter", a value equal to 10 cm. The meaning of this word is small, small.
Length - 1000 mm.
Span - 980 mm.
Flight weight - 560 g
Motor - 2826/6 2200.
Screw - 8 x 6..
The regulator is 40A.
Servos - NHT900
The battery is 2200 3S.
And here is the New Year, a Christmas tree, just a present.
And here is the model itself.
Winter is over and in the very first flight, "Scheckt" lousy - landed in a neighbor’s garden!
As a result, returned home with a broken face! First aid was rendered and he again tears into flight.
Well, who else will regret it except me?
I made several models according to the classical scheme and, somehow, I got bored.
I have lost touch with these profile wings, ridiculous stabilizers. Tolley is a carrier wing business, and even with a wide fuselage, controlled by the PGO and a full-fledged UVT, there is where to unleash your imagination and make another experiment.
Nostalgia tortured and I made a small pusher from a simple substrate under the laminate - 5 mm. thick.
Once out of habit, I took the drawing of the Dominator aircraft model by Sergey Alexandrov, corrected something, cut something, and got such a model.
Without hesitation, I called the model we have - "Kent."
Has nothing to do with cigarettes!
What does the word Kent mean? This term was borrowed from the Vainakh (Chechen-Ingush) language, and is translated as "impudent handsome", "well done", "good fellow".
By the way, "Kent" is also the name of the WWII heavy cruiser in honor of the county of the same name in the UK
The model is created as a coach.
In this version, the best design elements of Sergey Aleksandrov's “Killer Whale” and “Dominator” aircraft models were used.
Span - 980 mm.
Length - 1200 mm.
580 g flight weight
Motor - 3010С 1300Kv
Screw - 8 x 6.
The regulator is 6o A.
Servos - NHT900.
The battery is 2200 3S.
In the family of the "Emperor" replenishment appeared.
Not even a day had passed before I completed work on the creation of a Kent model, and I, in the meantime, created a new model — the most budget-friendly pusher!
Only 3 (three) sheets of the substrate for the laminate, measuring 50 x 120 cm., 5 mm thick. , a little glue, a little scotch tape three hours of free time, a little bit of imagination and flying!
Length - 1200mm.
Wingspan - 900 mm.
The weight of the empty model is 195 g.
It can take off from your hand and from any surface!
"Amphibian - 4" in all its glory.
It is possible to carry out a small reconstruction of the most budgetary pusher "Amphibian - 4"
To avoid mixing control, you can put an additional PB. There will be separate control of ailerons and PB.
Another model is not finished, another motor and servos are not installed, and my thoughts have already gone far far behind new ideas ...
Thanks for attention. Your valerian.