That's how it all began, the gearbox was taken from a VAZ 2101, the bridge too, the front beam is made of a VAZ cardan, the knuckles are homemade. The wheels from the UAZ are digested in the middle of the drive under the vaz bridge.
I installed the UMZ 5a engine, which was lying idle for about 15 years.
He made a drive from the engine to the gearbox due to the belt and pulleys, the upper pulley was taken from gas 69, the pulley to the gearbox from the compressor ZIL 131.
Installed steering from the same gas 69.
Made a frame under the seat and wings from a professional pipe 40 to 20