So I did not escape the temptation and also became interested in the topic of "cartoon" aircraft models. I decided to follow in the footsteps of Sergei Shevyrin, who had already built a "little one" - MiG-15.
First of all, I prepared the necessary materials.
Ceiling tile (ceiling) - 4 mm.
Construction foam - cylinder.
Moisture-resistant adhesive, universal for ceiling tiles - "Titan".
Colored adhesive tape.
Electronics.
Motor - Outrunner hex Tronik 24 g.
Regulator -30A.
Screw - 8 x 6.
Servos 9 g. - NHT900.
The battery is 1300 3S.
I found such patterns here. In the absence of the best, took advantage of them.
I realized that this is not enough to build a model. We'll have to do everything with the "spear" method.
Adhering to these patterns began to make various, separate details of the model.
First cut rings for the fuselage rebar.
Cut blanks for the inner lining of the fuselage. On the inside of the ceiling, I made rusty with a table fork, which would be easier to bend when glued.
He began to paste the inner lining of the middle part of the fuselage.
Glued wings and keel.
I tried on a stabilizer.
He began to glue the outer skin of the middle part of the fuselage.
Assembled the motor mount.
Fitting an insert with a motor to the middle of the fuselage.
I decided to use construction foam to create individual elements of the fuselage.
Foam in the nose and tail of the fuselage.
Everything would be fine if not for the extra weight.
Excess weight killed Icarus.
I clean the surface of the model, tighten it with colored tape.
I set the wings.
I begin to put hogs, thrust to the PB pass through the bowden laid in the keel.
Mounted servos, connect traction.
Before gluing the wings, I had to customize them in place.
Model It turns out pretty heavy - 180g. and this is without electronics.
It is necessary to somehow reduce weight.
The main weight added construction foam.
I had to do everything again without it.
I tested the motor, the thrust is normal.
The model turned out beautiful.
The first flight was unsuccessful. I put a more powerful engine with good traction. I will conduct experiments with screws. Propellers behave differently in the pipe, do not give the desired traction.
I hope for a speedy flight.