Good day to all. Today I’ll tell you how the author of the channel “Hydroponics” do it yourself"Assembled in home conditions, a hydroponic system for growing strawberries, also in this hydroponics you can grow vegetables and herbs.
The list of materials used by the author for this homemade.
Plastic container with a capacity of 18 l
Mineral sprays that are used for aquariums
Also a silicone hose for aeration
Tee for connecting nozzles
Narrow tape. (Can be replaced with electrical tape.)
Aquarium compressor
Black spray paint
Seedling pots
Water thermometer
Instruments:
Ruler
Marker
Drill
Wood crown
Stationery knife
Glue "moment".
First of all, the author decided on the number of pots.
After will make a markup based on the number of pots.
He will then make holes by placing the lid of the container on the board. This will prevent plastic breakage during drilling.
Next, the knife will remove the burrs formed during drilling.
And make a small hole in the corner of the cap under the hose.
Fitting.
The hydroponic cover is ready.
Fitting.
After, on the side wall of the container, glue a strip of adhesive tape.
And paint the container and the lid on the outside.
Like this.
Then remove the tape.
The hydroponic housing is ready.
The next step is the assembly of aeration. The author connected the nebulizers with a tee.
Then installed them in a container. (Under the mounts of the sprayers, the author advises applying a couple of drops of glue.)
Next, install a thermometer.
Inside the container.
The hose will fit into the hole provided for it on the cap.
And connect it to the compressor.
Such is the hydroponic system obtained by the author today.
And so it works.
And that’s all for me. Thank you all and see you soon!