» Topics » Advice »Magnetic holder for runout indicator

Magnetic holder for runout indicator



When machining a part on a lathe, sometimes it becomes necessary to check the radial runout. For these purposes, a special indicator is used. But the indicator needs to be fixed on something. An interesting solution was invented by the Master, he made a holder with a magnetic base. Now it can be fixed without problems anywhere in the machine.

The author had a metal square. He turned it, cut it, drilled holes and the part turned out, as in the last photo.





The second part of the holder is the holder for the camera. A powerful magnet is glued into the bottom of the holder.
Magnetic holder for runout indicator


Screws the nut onto the threads of the holder. On the other hand, screw the stud. On a hairpin sets a clip with the indicator.


Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...