In this article, Steve, the author of the Steve Carmichael YouTube channel, will tell you how to make an original bottle stopper from steel and wood.
Materials
- Walnut timber
- Impregnation for wood
- Steel tube element with gaskets link.
Instruments, used by the author.
- Lathe
- Band-saw
- Chisels
-
Manufacturing process.
The author purchased a cork head in an online store. Moreover, a suitable drill even came in the kit.
Steve chose a nut as the material for the pen. And he began preparing the chump.
At an angle of 45 degrees, I cut the edges of the workpiece. And he got such an octahedron. So there will be less turning work.
I found a suitable nozzle with a thread on the end.
I drilled a hole, limiting the depth of the mark from the masking tape.
He wound up the workpiece, drove the tailstock. It seems that there are no strong beats.
First, the master turns the cylinder out of the hexagon.
Then forms elegant descents.
Slices the right side of the workpiece, removes the headstock.
It grinds the upper part of the handle, polishes it with sandpaper, reducing the grain size.
Now impregnates the handle with oil, and removes it from the machine.
It remains only to connect both elements, and you're done!
Thanks to the author for the simple but useful dining room. device!
All good mood, good luck, and interesting ideas!