With the help of such an organizer table, the conductor and everything necessary for working with it are stored in one place. The conductor is fixed to the desktop, but can be easily dismantled if necessary. In a niche of the table is a box with drills and fasteners. The table also has a guide for fixing the stop when drilling several holes, at regular intervals.
Tools and materials:
-A circular saw;
-Circular Saw;
- Clamps;
-Plywood;
-Conductor;
-Guide;
-Roulette;
-Pencil;
-A screwdriver;
-Drill;
Milling cutter;
- Joiner's glue;
-Fasteners;
-Color;
-Hammer;
-Bandsaw machine;
Cutting machine;
Step One: Sawing
Table master makes of plywood. First you need to cut the plywood in size. The master does not give the dimensions, but if necessary it is not difficult to make a drawing of the table.
Step Two: Hole
So, the master has seven workpieces, the top and bottom of the table, two end parts, the front part and two workpiece blanks. In the workpiece of the lower part cuts a hole. This hole will play the role of a suspension, for storing the table on the wall.
Step Three: Build
Assembles a table. Screws the front wall. Before assembly, it applies carpentry glue to mating surfaces.
Fastens the side walls.
Nails the limit bar.
Screws the top cover.
Step Four: Install the Jig
To install the conductor, the master makes markings on the top cover and cuts a niche with a mill.
Screws the conductor.
Step Five: Desktop
The desktop is made of two blanks fixed to the top cover. The master cut the corners of the blanks.
Next, you need to fix the guides. Marks the installation location.
Cuts length guides.
Cut groove under guides.
Fastens guides in a groove.
Next, you need to fix the details of the desktop on the top cover. This is done by the master with the help of wood glue and screws.
Step Six: Grinding
The last step is grinding and polishing the desktop with wax.
Now the jig and all related tools are easy to store in one place.
The whole process of making an organizer table for a conductor can be seen in the video.