It turns out that our people are even in Australia, well, with our Russian (or Soviet) thinking. This wise Australian loves football and often goes to matches. But he also loves to “cheer” for his favorite team, warming up a bit from the inside-))) The problem is that the organizers of football matches do not seem to mind the hot drink, but prefer that he buy it in a bar at the stadium. Well, as in Russia, all sorts of suspicious liquids are collected at the entrance by the guard. Left a couple of times without a fermenter and refusing to replenish the budget of local bourgeois, the master found a way out and made a secret flask.
Tools and materials:
-Metal empty cylinder from under the deodorant;
-Plastic bottle with screw cap 0.25 ml;
-Glue waterproof;
-Dremel;
-Nadfiles;
-Pliers;
-Nippers;
-Drill;
-Toothbrush;
-Detergent;
-Water;
Step One: Disassembling the Cylinder
Removes the cap and aerosol nozzle from the balloon. Drills a hole at the top.
Using nippers and pliers, removes the top of the container.
Step Two: Flush
Now you need to thoroughly rinse the detergent bottle several times and rinse. Then scrub with a toothbrush, soak for a day in soapy water and rinse thoroughly again.
Step Three: Plastic Bottle
Next, the master cuts off the top of the threaded bottle. It is necessary to fit this part to the cylinder opening. The master first uses the files, and then, slightly, melts the end of the part.
Step Four: Build
All parts are ready and the master glues the threaded part to the cylinder. After the glue dries, the drink is poured in and the lid is screwed. For complete disguise, you need to install an aerosol nozzle, having previously removed from the inside the parts that prevent it from becoming a regular place.
Well, now the author is again ready to cheer on his favorite team.