» Fixtures » Instruments »What can be done from a hand clamp and chain

What can be done from a hand clamp and chain


Good day to all. Today, the author of the YouTube channel “SL Sanda” will show how he made a chain key from a chain and a manual clamp.

For this, the author needed

Instruments:
Drilling machine
Angle grinder
Cutting wheel for metal
Grinding wheel
Vise
Marker
Pliers
Welding machine
Electrodes

Materials:
Hand clamp.

Chain from a moped.

And a steel bar is about 6 mm in diameter.

To begin with, the author removed the lock from the chain.



After making a hole on one of the clamping jaws.


Then he sharpened the edges of the lips a little.



And on the second sponge, the author needs to make a hook.

To do this, he will first make a hole of small diameter.

And then it will increase.

It turned out somehow.

The chain link should go into the hook.

Then the author, measures the desired length of the chain.


And cut off the excess.


Now connect one end of the chain with a sponge.


And install the castle.

Like this.


From the steel bar, the author will cut a piece with a length of 50 -70 mm.


And weld it to the clamp adjusting bolt.


Such a tool turned out.

Test.



The tool copes with its task.


And that’s all for me. Thank you all and see you soon!
3.2
3.8
2.8

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
4 commentary
I don’t know if you are talking about this, but I just welded the chain to the metal profile. And do not spoil another tool.
I don’t know if you are talking about this, but I just welded the chain to the metal profile. And do not spoil another tool.
Guest Andrey
At the chain key, at least you can increase the lever, but here is how to do it. The girth is large, but is there enough strength to turn without increasing the lever, and what does not suit the “toad” performing the same function, and why weld another rod to the clamping screw, there is not much effort.
Guest Andrey
Spoiled the "toad", complicated the already known chain key.

We advise you to read:

Hand it for the smartphone ...