» Fixtures » Instruments »Tool from disposable lighters

Disposable Lighter Tool


Together with the used lighters, we throw out the wheels, which can still work nicely. Let's try to give them a second life.

We will need:
- actually lighters, from 1 to 5
- Steel rod, you can nail, but thicker than 2.5mm
- drill (with a lathe, of course, easier)
- hacksaw
- file
- die M2.5
- M2.5 nut and washer

We disassemble lighters
]

We remove the wheels

We make such a roller

Why, holding the rod in the drill chuck, saw off, in length, depending on the number of wheels

Grind to a diameter of 2.5mm

Cut the thread M2.5

Can collect

It turned out such a tool for a drill

The scope is the widest. Can be processed both inside and out.


I use this homemade already several years, very convenient. Decided to share
6.8
7.1
6.1

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...