» Construction » Stoves, fireplaces, heating »Simple mini oven and oven powered by 12 Volts

Simple mini oven and oven powered by 12 Volts

Hello dear readers and the inhabitants of our site!
In this article, the author of the YouTube channel "all ideas" will tell you how to make a mini oven and oven powered by 12 V.

Materials
- Tin can and lid


- glow plugs


- wires
- Power supply 12 V, or car battery.

Instruments, used by the author.
- Drill or screwdriver
- Step drill
- Pliers.

Manufacturing process.
So, the author prepared all the necessary materials, and marked the jar.





Now he drills three symmetrical holes with a stepped drill.


Then screw the glow plugs into the holes. It turns out here is such a simple design.






Connects all three candles with a wire.





Now connects the second wire.


For convenience, the wires are intertwined.



First you need to light the candles. They heat up very much, and do not even cool down right away.




Cleans all surfaces.

Knead a simple cake dough.



Lubricates the bottom cover with oil, and spreads the cake on it.




Covers the cake with a heater.

He turns on the heater and cooks fried eggs with fried eggs.



That's all - a simple snack is ready in a few minutes.





Thanks to the author for the simplest design of a marching electric furnace!

All good mood, good luck, and interesting ideas!
5.1
7.4
5.6

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
10 comments
Author
This "copper" Chinese is also magnetized ... bad
one and a half square copper wire is already hot all ...
Faced with Ketai wires, whose "copper" was perplexing! Apparently, it’s time to introduce the Chinese correction factor in the PUE! Moreover, during the reconstruction of one small substation, two 3X50 cable reels were used up. And on the cable itself, and on the drums, and in the accompanying documents - 3X50! But doubts tormented my soul, measured - 3Х35 !!! It's good that the cable was provided by the customer, the owner of the substation, but I keep the passport from the drum just in case! smile
Depending on the model of the glow plug, it alone can stretch 15 A ...
And about the wires .. Somehow I noticed over the years of digging in cars, that in low-voltage automobile networks, for some reason the wires get very hot. (I made myself coffee makers and teapots, and installed additional lights.). Fuse at 15 And still alive, and the wire and a half square copper is already hot all ...
In accordance with the PUE (Table 1.3.4.), The permissible continuous current for wires and cords with rubber and polyvinyl chloride insulation with copper conductors with an open strip of 17 A for a conductor with a cross section of 1 mm².
Author
Chef, well, then you need to drill with a step drill! xaxa
I posted it to view the reactivity of readers. I myself know - complete shit - but it is necessary to dilute the theme.
Yes, and I did not regret my acc - they threw cons.
Once again - article - SARKAZM.
Author
Candles from 100 rubles apiece on alikha
Author
I was especially pleased with the “case” - such as a good conductor ... xaxa
If something burns and will be - then the contact of the candle and tin.
Yes, what does the price of candles mean? !!! In my basement and now a couple of pieces are lying around ... (I used to drive diesels. And changing them one by one is not a thankful task) ...
Why didn’t anyone pay attention to the fact that this is a fake ???
Suppose the author took the most-weakest candles ... Amperes for 5 .. So what ?? How long is the battery that is shown at a current of 15 Amperes ??? (And, after all, it happens for 15 !!! Then - 45 !!)
And why do not the wires burn ???
P.S. I once made a boiler for a long time from a glow plug in a tube with quartz sand, which was screwed into a can from Nescafe ... First I "guessed" to make it with a cigarette lighter plug ... When the plug melted (plug), I made "crocodiles" on the battery ... But, while it was boiling, the wires began to smoke (by the way, there were about the same (2.5) only multicore ...
So it's ONE candle! And here are three !!! And they don’t burn ... And the tin does not burn out in the place of the "mass" - there the candles are not even clamped !!!
... Open the hood, see what section the tire goes by candlelight ...))))
Guest Andrey
And how much will glow plugs cost? They are far from penny .... Crap shorter ..
Guest Nikolay
the cost of glow plugs from a diesel engine? Yes, your scrambled eggs with gold crust will be.

We advise you to read:

Hand it for the smartphone ...