» Topics » Advice »Do-it-yourself file for a jigsaw from a piece of metal saw

Do-it-yourself file for a jigsaw from a piece of metal saw

Do-it-yourself file for a jigsaw from a piece of metal saw


If you have an old piece of metal saw lying around, then you should not throw it away, because it makes a good file for metal and wood for a jigsaw. Let's start by watching the video:

Happy viewing !



Materials and tools:
- Fragment of a file for metal
- Bulgarian
- File
- Sandpaper

Take a jigsaw file and circle it with a marker on a piece of metal saw




That's how it should turn out



Saw with a grinder, do not forget about protection



We file the file to remove burrs

Here is such a file



We put it on a jigsaw, do not tighten it much



As you can see the file easily saws a board 25 mm thick



Thanks for attention !

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...