» Topics » Questions "Question on a soldering iron with an" eternal "sting ...

Question on a soldering iron with an "eternal" sting ...

I bought a soldering iron with an "eternal" sting for 100 watts. This sting, God forbid, clean with sandpaper and a file. He turned on the soldering iron, all the black sting, cleaned with soda, washed, turned on again, black again, the solder does not stick. Somehow I tinned the tip of the sting with acid in a day.

The question is, why invent this? Copper stings are flogged without problems, and if it is crap, it is shirted with a file and you solder further. Erased? Threw it and put a new one, it’s worth a penny! Or am I wrong in something?
Question \ topic is automatically published in the social. site network - stay tuned for answers there:

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
9 comments
Author
regular plug, 220V soldering iron, 100 watts. Extools company
In-in ... The plug was at least normal? Not "American"?
and then he blushes the infection ... solder burns nafig
Are you sure that it is on 220V? Perhaps our Chinese friends again cheated on something? Try playing with a dimmer. scratch
Author
and then he blushes the infection ... solder burns nafig
According to the table, there should be 484 ohms, is it too much, my 600?

It is necessary either to dim the dimmer or diode.


Dmitry, so if you believe grandfather Zhore (He is Sema), then with 600 Ohms he should warm up less than with 484 declared.))))
Will the soldering iron also warm like 60 watts?
No, the powers will be shared in proportion to the resistances.
Author
But what if you insert a 60-watt bulb in sequence? Will the soldering iron also warm like 60 watts?
Author
turned off the light and got scared, the soldering iron tip shines red! Checked the resistance - 600 ohms. There are no ohms on the case.
According to the table, there should be 484 ohms, is it too much, my 600?

It is necessary either to dim the dimmer or diode.
I bought a soldering iron with an "eternal" sting
To the question of eternity, did old Einstein say something there? And what for me something "eternal", if I myself am not immortal? scratch

We advise you to read:

Hand it for the smartphone ...