Hi the inhabitants of our site! So in this article we will look at how to make a boat in radio control. The boat - because it is very compact and is not suitable for large rivers and lakes. His element is a bath or a pool.
I also attach links to the main components
For this homemade product we need:
1. Electric motor with blades 2 pcs. link
2. A piece of foam
3. Pieces of plastic or ice cream sticks
4. Wires
5. Board and remote control for radio control A simpler option in the form of two boards
6. Small 3.7 volt battery link
Of the tools we will also need:
1. Soldering iron
2. Stationery knife
3. Pen or marker
Well then, let's proceed to the assembly. Before that, pay attention to the fact that the boat is made as simple as possible and is not intended for rivers, lakes and other large reservoirs.
The first step is to cut a polygon from a piece of foam. Draw lines and cut out.
Next, cut out two pieces of plastic or use ice cream sticks. We attach electric motors to the plates. We make cuts in the foam and insert the plates.
We solder the connector for the battery to the radio control board. We glue the board and battery to the base.
Done! Turn on the remote and test our boat.
Here is a video from the author with a detailed assembly: