» Topics » Advice »Mini drill - it's easy

A mini drill is easy

Want to make a mini drill do it yourself? Then this article is for you. Let's try to make this desired tool from a simple thermal gun.



We will need:

1. The gun for hot glue.
2. Mini electric motor (can be purchased at any Chinese online store).
3. Microswitch.
4. Micro button.
5. A pair of LEDs.
6. Power connector.
7. Drill chuck, cutting disc, etc. (You can also purchase in any Chinese online store).

Hot melt glue gun.


Wiring diagram.
A mini drill is easy


Lineup of parts in the housing.



Step-by-step instructions for manufacturing mini drills:

1. We prepare regular places for parts in the body of our mini drill.
2. We solder the electric circuit of a mini drill.
3. We place soldered elements of a mini drill in the case.
4. Connect the mini drill to the power source.
5. Check the performance of our tool.
6. Enjoy working with our new tool.

Detailed instructions for the manufacture of mini drills, in home The conditions are outlined in the video below. All work takes from one hour to two. Depending on your skill ...



Do it with pleasure, and you will succeed.

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
4 commentary
Printed circuit boards drill the very thing about the handle, all the classics of this shape and this, I think, is not just. The drill is only thinner.
Once upon a time I used a similar mini-drill with a handle. I can say one thing: it’s inconvenient, I tried it, but in the end I drilled, holding the electric motor in my hand, and not by the handle.
And cuts .. no way !!!
Another "YouTube-home-made" from the category of "unbelievably cool", "do it yourself" and "Everything is shocked by ..."
In vain a damaged thermogun, the video clearly shows how the author holds the machine, I know firsthand, he did it himself, the gun is very uncomfortable. Yes, and the screwdriver handle wasted in vain, ruined the screwdriver. About nutrition, not a word, but this balalaika eats well under load decently! smile

We advise you to read:

Hand it for the smartphone ...